Gutter profiles compared side by side come down to four shapes: half-round, square, ogee and deep-flow. Half-round is the common default, square gives a crisp modern line, ogee copies a moulded traditional look, and deep-flow carries more water for larger roofs. This guide compares them by appearance, capacity and fittings, so you can ask for the right one when you replace guttering.
This comparison covers shapes, not products, and the order isn't a ranking. Brands appear only as examples. Check any maker's current range and capacity guidance before you buy, and use it for the exact system on your quote.
Gutter profiles compared in one table
The four common gutter profiles compared
| Profile | Look | Capacity | Fittings and joins | Price position |
|---|---|---|---|---|
| Half-round | Rounded, plain, widely recognised | Standard for most houses | Very widely available, many sizes | Usually the lowest |
| Square | Straight sides and sharp corners, modern | Comparable to half-round of similar width | Corner and stop-end fittings are shape-specific | Often a little higher |
| Ogee | Moulded face that echoes a cornice | Varies by system and width | Narrower choice of fittings and colours | Often higher |
| Deep-flow | Deeper half-round, slightly heavier look | Higher than standard half-round | Needs matching outlets and downpipes | Higher, mainly where capacity is needed |
Half-round: the common choice
Half-round is what most homes have. Parts are easy to find, so repairs and extensions are straightforward. It suits most house styles, and it is usually the lowest-cost route. Plenty of uPVC systems from makers such as FloPlast, Marley and Brett Martin come in this shape.
Square profiles for a modern line
Square, or box, gutters have a flat base and straight sides. They sit neatly against modern fascias and look sharper on contemporary extensions. The corners need careful detailing, and their fittings only work with their own shape. Water capacity depends on the width and depth of the particular system, so check the maker's guidance.
Ogee for period character
An ogee gutter has a curved, moulded face, like a classical cornice. It is popular on Victorian and Edwardian homes, where plain half-round can look out of place. Fittings are more limited than for half-round, so it is worth checking the colour and range before you commit. If the house is old or listed, our guide to cast iron vs heritage-style guttering covers materials.
Deep-flow for heavier run-off
Deep-flow gutters are deeper than standard half-round, so they carry more water. They suit large roofs, long runs and exposed locations where rain is heavy. A bigger gutter can't help if the outlet or downpipe is too small, though. Read what size gutter you need before paying for extra capacity.
Gutter profiles compared by size and mixing
Fittings are rarely interchangeable between profiles or between manufacturers. A square union won't fit a half-round gutter, and one maker's brackets may not suit another's gutter. If you're only replacing part of the system, ask how the new profile will join the one you're keeping. Often the cleaner answer is to renew the whole elevation.
Which of the gutter profiles compared suits your house
- Match the building. Period homes often suit ogee or heritage styles, while newer homes suit half-round or square.
- Match the roof. Large or exposed roofs may justify deep-flow, as long as the outlets keep up.
- Match what stays. If you're keeping a run, choose a profile it can join.
- Ask about parts. Choose a system whose fittings you can still buy in ten years' time.
- Check the price. Ask the contractor to quote the same elevation in two profiles.
Shape also interacts with how the system is made. Our comparison of seamless aluminium and sectional guttering explains that choice. Prices for each profile sit inside the ranges in the gutter replacement cost guide, and the gutter replacement page lists what to include in your enquiry. If you're not yet sure you need new gutters, start with repair or replace guttering.
This page covers gutter profiles compared by category only, and it doesn't rank or endorse any brand. Whichever profile you prefer, ask for free quotes that name the system and profile clearly.
Frequently asked questions
What is the most common gutter profile in the UK?
Half-round is the most common on UK houses, mainly because parts are widely available and it is usually the lowest-cost option.
Is square guttering better than half-round?
Neither is better overall. Square gives a modern look and sits well against flat fascias, while half-round has wider availability. Capacity depends on the width and depth of the specific system.
Can I mix different gutter profiles on one house?
You can, but they won't join directly. A contractor can use an adaptor, or fit the new profile on a separate elevation. Many people renew the whole run for a matching result.
What does ogee mean for guttering?
Ogee describes a gutter whose front face has a curved, moulded profile, like a classical cornice. It suits many period houses.
Ready to talk to a gutter replacement specialist?
Get Free Quotes →
